Mastice per assemblaggio G6

GENERAL USAGE DIRECTIONS

Apply on well cleaned sanded surfaces; make sure the substrate is free from dust, fibres, dirt and surface condensation. Thoroughly mix the mastic with 1,0 – 3,0% catalyst paste (benzoyl peroxide) or 1.0 – 2.0% liquid catalyst (methyl ethyl ketone peroxide), bearing in mind that the amount of catalyst required depends the temperature of use and the processing times required. The recommended temperature range is between 12 and 30 ° C. It is applied manually with a spatula after carefully mixing the catalyst. In its original packaging, the product can be used for 12 months if stored indoors away from direct sunlight, at temperatures not exceeding 20°C.

Categoria:
FacebookTwitterPinterestRedditDeliciousLinkedinEmailPrint

Mastic based on unsaturated polyester resins reinforced with special mineral microfibres
It has good mechanical, thermal and chemical resistance and excellent anchorage to the substrate. In the composite sector, it represents a practical and economical solution for assembling the framework of the model, spot-welding the side members, gluing the inserts, fixing the furniture and plant engineering. It can be used with paste or liquid catalyst.

SUPPORTS

Recommended: polyester and vinylester fiberglass, wood.

Brand

In.Te.c (Slem)

SCARICA LA SCHEDA TECNICA

Download

Prodotti correlati